Finished Size Settings Dialog Box - Canon imagePROGRAF iPF685 User Manual

Finished Size Settings Dialog Box

• Layout Area
This allows you to check the arrangement and orientation of objects.
Status Bar
•
This shows the paper source, roll paper width, and output size.
Finished Size Settings Dialog Box
Finished Size Settings Dialog Box
This dialog box is displayed when you select Finished Size Settings from the Edit menu. This allows you to con-
figure finished size settings.
• Finished Size
Selects the method for setting the finished size.
The following settings are available for the finished size.
Fit Roll Paper Width
Specify Folded Size
200
Rotate Page 90 degrees (Con-
serve Paper)
Setting
Prints by automatically enlarging or reducing the entire document so that the width of the
document matches the roll paper width.
Prints by automatically enlarging or reducing the entire document to match the size of the
paper. Select the actual size of the paper you want to print on in Fit Paper Size.
Prints by rotating pages by 90 degrees. Pages are automatically rotated if they will fit with-
in the roll paper width when rotated, and are not rotated if they will not fit within the roll
paper width.
Details
iPF685
User's Guide