Canon imagePROGRAF iPF685 User Manual page 444

Erasing Data on the Printer's Hard Disk
•
For a more secure method of preventing data recovery, we recommend physically or magnetically destroying the
hard disk. In this case, the hard disk can no longer be used.
Important
•
Erase HDD Data is not available if there is a job queue.
Additionally, print jobs are not processed during execution of Erase HDD Data.
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Settings/Adj. tab (
Note
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select System Setup, and then press the OK button.
4
Press ▲ or ▼ to select Erase HDD Data, and then press the OK button.
5
Press ▲ or ▼ to select High Speed, Secure High Spd., or Secure, and then press the OK button to dis-
play the confirmation screen.
Note
6
Press ▲ or ▼ to select Yes, and then press the OK button to start erasure.
After the printer hard disk is erased, the printer automatically restarts.
444
).
•
If the Tab Selection screen is not displayed, press the Menu button.
•
If a password has been set on the printer, the Admin.Pswd screen is displayed. In this case, enter the
password and press the OK button to go to the next step.
•
As for the time required for deletion, confirm it on the Control Panel. However, when High Speed is selec-
ted, this finishes in several seconds.
iPF685
User's Guide