E7 / E7D Controls; C95 / C97 / C125 / C127 / E95 / E97 / E125 / E127 / E165 Controls - Lighthouse a65 Installation And Operation Instructions Manual

6.3 e7 / e7D Controls

Description Functions
1 Touch- you can touch the screen to operate many
screen common functions, including all menu
operations.
2 Menu Accesses menus. Press again to close
menus.
3 UniControl Provides a joystick, rotary control and
an OK push button for using menus and
applications.
4 Back Press to return to a previous menu or
dialog level.
5 • Press and release to access the
WPT / MOB
waypoint options. Press again to place
a waypoint.
• Press and hold to place a Man
Overboard (MOB) marker at your
current position.
6 Power • Press once to switch the unit ON.
• Once powered on, press the Power
button again to adjust the brightness,
perform a screen capture, access
Powersave mode or access the power
controls for external devices.
• Press and hold to switch the unit OFF.
• If an integrated pilot is engaged,
press and hold put the autopilot into
STANDBY mode.
7 Card reader Open the card door to insert or remove
slot a MicroSD card. There are 2 card slots
(labelled 1 and 2), used for electronic
charts and archiving waypoint, route,
track and settings data.
Getting started
6.4 c95 / c97 / c125 / c127 / e95 / e97 /
e125 / e127 / e165 Controls
1
1
D12179-1
Description Functions
1 Touch-
screen
2 Home
3 Menu
4 UniControl
5 Back
6 Range
In/Out
7
WPT / MOB
8 Power
9 Card reader
slot
10 Pilot
11 Switch
Active Pane
11 10
you can touch the screen to operate
many common functions, including all
menu operations.
Press to return to the homescreen.
Accesses menus. Press again to close
menus.
Provides a joystick, rotary control and
an OK push button for using menus and
applications.
Press to return to a previous menu or
dialog level.
Press minus (-) to range out and plus (+)
to range in
• Press and release to access the
waypoint options. Press again to place
a waypoint.
• Press and hold to place a Man
Overboard (MOB) marker at your
current position.
• Press once to switch the unit ON.
• Once powered on, press the Power
button again to adjust the brightness,
perform a screen capture, access
Powersave mode or access the power
controls for external devices.
• Press and hold to switch the unit OFF.
Open the card door to insert or remove
a MicroSD card. There are 2 card slots
(labelled 1 and 2), used for electronic
charts and archiving waypoint, route,
track and settings data.
• Press to disengage integrated
autopilot.
• Press and hold to activate Auto mode
on integrated autopilot.
Press to switch the active pane (in
splitscreen pages).
2 3
4
5
6
7
8
9
D12276-1
91