Ais Connection; Fastheading Connection - Lighthouse a65 Installation And Operation Instructions Manual

4.16 AIS connection

A compatible AIS can be connected using SeaTalk
or NMEA 0183.
Connection using SeaTalk
1
1. Multifunction display.
2. SeaTalk ng AIS receiver / transceiver.
Connection using NMEA 0183
1
1. VHF radio.
2. AIS unit.
3. Multifunction display.
70
ng
2
ng
SeaTalk
2
NM EA 0183 (4800)
NM EA0183 (38400)

4.17 Fastheading connection

ng If you wish to use MARPA (radar target acquisition)
functions on your multifunction display you need
either:
• An autopilot connected to the multifunction display
via SeaTalk ng
connected to the course computer and calibrated
via the pilot control head; or:
• A Raymarine or third-party fastheading sensor
connected to the multifunction display via NMEA
0183.
Note: Please contact your dealer or Raymarine
technical support for more information.
D12263-1
D12264-1
or NMEA 0183. The compass is
a Series / c Series / e Series