Basic Touchscreen Operations - Lighthouse a65 Installation And Operation Instructions Manual

6.11 Basic touchscreen operations

Placing and moving the cursor using
touch
To place or move the cursor around the screen on
a touchscreen multifunction display follow the steps
below.
1. Touch the screen at any position on the screen to
place the cursor there.
Touchscreen lock
On a multifunction display with HybridTouch you can
lock the touchscreen to prevent accidental use.
For example, locking the touchscreen is particularly
useful in rough water or weather conditions.
The touchscreen can be locked and unlocked from
the homescreen. The touchscreen can only be
unlocked using physical buttons.
Locking the touchscreen – New e Series
On new e Series multifunction displays the
Homescreen contains a dedicated Touch Lock icon.
With the homescreen displayed:
1. Select the Touch Lock icon.
It changes color to indicate that the touchscreen
is disabled. All functions are still available using
the physical buttons.
Locking the touchscreen - touch only
displays
When a touch only display is paired with an optional
remote keypad the touchscreen can be locked.
From the Homescreen:
1. Select the Set-up icon.
2. Select Touch-Lock so that On is highlighted.
The touchscreen is now locked.
Unlocking the touchscreen – New e Series
You can unlock the touchscreen by following the
steps below.
With the homescreen displayed:
1. Use the UniControl to highlight the Touch Lock
icon.
2. Press the OK button.
The Touchscreen is enabled.
102
Touchscreen is locked. All
functions remain available using
physical buttons.
Touchscreen is unlocked.
Unlocking the touchscreen - touch only
displays
To unlock the touchscreen of a touch only display
when paired with a remote keypad follow the steps
below.
From the Homescreen:
1. Select the Set-up icon.
2. Select Touch-Lock so that Off is highlighted.
The touchscreen is now unlocked.
a Series / c Series / e Series