Typical Systems - Lighthouse a65 Installation And Operation Instructions Manual

3.7 Typical systems

The illustrations below show examples of possible system configurations, for more details on compatible
Raymarine devices please refer to the System integration section.
Note: In the examples below the multifunction display(s) could be any variant of Raymarine's 3rd
generation multifunction displays e.g. a Series, c Series, e Series or gS Series.
Example: Basic system
1
hs
SeaT alk / RayNet
1. Multifunction display
2. Network switch
3. Radar scanner
4. Actuator Control Unit (ACU)
5. Evolution autopilot
6. SeaTalk ng pilot controller (optional)
Note: A network switch is only required if multiple devices are connected using SeaTalk
Example: Basic system with sonar variant display
1
1. Multifunction display
2. Sonar transducer
3. Radar scanner
4. Evolution autopilot
5. SeaTalk ng pilot controller (optional)
Planning the installation
2
hs
SeaT alk / RayNet
2
hs
SeaTalk / RayNet
3
6
ng
SeaTalk
3
ng
SeaT alk
4 5
D12245-3
hs / RayNet.
4 5
D12589-2
41