Depth & Contour Options - Lighthouse a65 Installation And Operation Instructions Manual

18.15 Depth & Contour options
If supported by your cartography type, the following depth and contour settings are available.
Note: The menu items available are dependant upon your cartography type. The depth options are
dependant upon the units of measure in use on your system.
Cartography
Menu item type
Show Soundings LightHouse
vector charts
and Navionics
Show Contours Navionics
Shallow Contour LightHouse
charts
Safety Contour LightHouse
charts
LightHouse
Deep Contour
vector charts
and Navionics
Chart application
Description
Determines the depth at which
depth soundings are displayed.
Determines whether contours are
displayed.
Determines the depth at which
the Shallow contour is displayed.
The Shallow contour cannot be
set to a value greater than the
Safety or Deep contours.
Determines the depth at which
the Safety contour is displayed.
The Safety contour cannot be set
to a value less than the Shallow
contour or higher than the Deep
contour.
Determines the depth at which
the Deep contour is displayed.
The Deep contour cannot be set
to a value less than the Shallow
or Safety contours.
Options
• None
• 0–30 ft / 0–10 m / 0–5 fa
• 0–60 ft / 0–20 m / 0–10 fa
• 0–180 ft / 0–50 m / 0–30 fa
• 0–500 ft / 0–150 m / 0–83 fa
• All (default)
• Off
• 0–6 ft / 0–2 m / 0–1 fa
• 0–18 ft / 0–5 m / 0–3 fa
• 0–30 ft / 0–10 m / 0–5 fa
• 0–50 ft / 0–15 m / 0–8 fa
• 0–60 ft / 0–20 m / 0–10 fa
• All (default)
• Off
• 6 ft / 2 m / 1 fa
• 12 ft / 3 m / 2 fa (default)
• 18 ft / 5 m / 3 fa
• 20 ft / 6 m / 4 fa
• 30 ft / 10 m / 5 fa
• 50 ft / 15 m / 8 fa
• 60 ft / 20 m / 10 fa
• Off
• 6 ft / 2 m / 1 fa
• 12 ft / 3 m / 2 fa
• 18 ft / 5 m / 3 fa
• 20 ft / 6 m / 4 fa
• 30 ft / 10 m / 5 fa (default)
• 50 ft / 15 m / 8 fa
• 60 ft / 20 m / 10 fa
• Off
• 6 ft / 2 m / 1 fa
• 12 ft / 3 m / 2 fa
• 18 ft / 5 m / 3 fa
• 20 ft / 6 m / 4 fa
• 30 ft / 10 m / 5 fa
• 50 ft / 15 m / 8 fa (default)
• 60 ft / 20 m / 10 fa
259