Chart Ranging And Panning - Lighthouse a65 Installation And Operation Instructions Manual

• From a selected waypoint or any leg within
a route.
You can also follow any route in reverse order.
Following a stored route
From the chart application:
1. Select Menu.
2. Select Navigate.
3. Select Follow Route.
The Route list is displayed.
4. Select the route you want to follow.
5. Select Follow Route, or
6. Select Follow Route in Reverse to follow the
route in reverse order.
Cancelling navigation of a route
From the chart application:
1. Select the Route.
The route context menu is displayed.
2. Select Stop Follow.
Advancing to the next waypoint in a route
You can skip the current active waypoint and
advance to the next waypoint in a route at any time.
While following a route in the chart application:
1. Select the route.
The route context menu is displayed.
2. Select Advance Waypoint.
Note: If the current destination is the last waypoint,
the chart advances on to the first waypoint in the
route.
Chart application

18.4 Chart ranging and panning

Ranging in and out
The table below shows the Range controls available
for each display variant.
Rotary Control
Range in and
Range out buttons
Range in and
Range out
on-screen icons
Multi-Touch
gesture — Pinch
to Zoom
Panning the chart
You can pan the chart area on a touchscreen
multifunction display by following the steps below.
In the chart application:
1. Swipe your finger across the screen from right
to left to pan right.
2. Swipe your finger across the screen from left to
right to pan left.
3. Swipe your finger across the screen from top to
bottom to pan up.
4. Swipe your finger across the screen from bottom
to top to pan down.
Panning the chart
You can pan the chart area on a non-touchscreen
multifunction display by following the steps below.
From the chart application:
1. Move the Joystick in the direction you want to
pan.
• c Series
• e Series
• RMK-9 keypad
• c Series
• e Series
(excluding e7
and e7D
• RMK-9 keypad
• a Series
• e Series
• gS Series
Note: e Series
and gS Series
on-screen range
controls can
be enabled
and disabled
from the
Homescreen:
Customize
> Display
Preferences
> Range
Controls
• a Series
• gS Series
239