Camera / Video In-Out Connection - Lighthouse a65 Installation And Operation Instructions Manual

4.24 Camera / video in-out connection

A camera / video device or external display can be
connected to New e Series multifunction displays
(excluding the e7 / e7D) using the dedicated video
in/out connector.
Note: New a Series and New c Series multifunction
displays do not have a dedicated video in/out
connector.
Video In
Examples of video input sources that you can
connect to the display include:
• Video camera.
• Thermal camera.
• DVD player.
• Portable digital video player.
4 3
1. Rear connector panel of multifunction display.
2. Video accessory cable.
3. BNC video connector (input 2).
4. Thermal camera.
Note: To listen to a movie's audio track, any
connected DVD or digital video player will require
speakers to be connected to the players audio
output.
Video out
Examples of video output devices that you can
connect to the display include:
• HDTV with VGA input.
• VGA monitor.
4
1. Rear connector panel of multifunction display.
Cables and connections
2
1
1 2
3
2. Video accessory cable.
3. VGA cable to external display.
4. External display.
Video specification
Signal type
Format
Connector type
Output resolution
e9 and e12 Video cables
The following video cable is required for the video in
/ out connector on the e95 / e97 / e125 / e127 variant
multifunction displays.
Part number
R70003
D12328-1
D12329-1
Composite
PAL or NTSC
BNC (female)
720p
Description Notes
5 m (16.4 ft.) Video
cable for e9 and
e12 (1 x video in
and 1 x video out
VGA)
75