Setting Boat Details; Setting Maximum Engine Rpm - Lighthouse a65 Installation And Operation Instructions Manual

21.6 Setting boat details

You can change vessel settings from the Data
application menu.
From the Data application:
1. Select Menu.
2. Select Boat Details.
3. Select Num. of Engines, Num. of Fuel Tanks,
or Num. of Batteries.
4. Select either 1, 2, 3, 4 or 5.
If the number of engines has been changed then
the Engine datapage will be reset to display the
correct number of engines.
Data application

21.7 Setting maximum engine RPM

You can set the maximum RPM range to display on
the RPM data item.
From the data application:
1. Select Menu.
2. Select Max RPM Range.
A list of available RPM settings is displayed.
3. Select the required RPM range.
A tick will be placed next to the selected RPM
range in the menu and the RPM range on the
engine datapage will be changed to your new
setting.
Examples
Auto*
Note: *The maximum RPM when in auto mode is
set by the engine.
10,000 RPM
329