Seatalk Ng Connections - Lighthouse a65 Installation And Operation Instructions Manual

4.18 SeaTalk ng connections
The display can connect to a SeaTalk
The display can use SeaTalk
• SeaTalk ng instruments
• SeaTalk ng autopilots
• SeaTalk equipment via the optional SeaTalk to
ng
SeaTalk converter
• NMEA 2000 equipment via optional DeviceNet
adaptor cables
Typical SeaTalk ng system
1
3
6
12 V / 24 V dc
8
9
1. SeaTalk ng instrument
2. SeaTalk ng pilot control head
3. iTC-5 converter
4. Wind transducer
5. SeaTalk ng multifunction display
6. Power supply
7. SeaTalk ng autopilot
8. iTC-5 converter
9. Depth transducer
10. Speed transducer
For details of SeaTalk ng
Chapter 33 Spares and
SeaTalk ng power requirements
The SeaTalk ng bus requires a 12 V power supply.
Power may be provided from:
• Raymarine equipment with a regulated 12 V power
supply (for example, a SmartPilot SPX course
computer); or:
Cables and connections
ng network.
ng to communicate with:
2
4
5
7
cabling please refer to
accessories.
• Other suitable 12 V power supply.
Note: SeaTalk
multifunction displays and other equipment with a
dedicated power supply input.
10
D12176-4
ng does NOT supply power to
71