Radar Display Overview - Lighthouse a65 Installation And Operation Instructions Manual

2. Select Power up Radar to turn the radar on, or
Power down Radar to turn the radar off.
3. Select Radar: Tx to start the radar transmitting,
or Radar: Stdby to stop the radar transmitting.
294

20.3 Radar display overview

With your radar scanner connected and the radar in
transmit mode, the radar picture provides a map-like
representation of the area in which the radar is
operating.
2
1 3 4
10 11 12 13
Item Description
1 Range
2
On-screen controls (Touchscreen
multifunction displays only.)
3 Gain mode
4 Ship's Heading Marker (SHM)
5 Orientation
6 Guard Zone
7 Motion mode
8 Range status
9 Range ring spacing
10 Data cell overlay
11 Waypoint
12 Safe zone ring
13 Range out (Touchscreen multifunction
displays only.)
14 Range in (Touchscreen multifunction displays
only.)
15 Ship's position
Note: On-screen range controls can be enabled
and disabled from the homescreen: Customize >
Display Preferences > Range Controls
Additional functionality of the radar application
includes:
• Color palettes.
• Adding AIS overlay.
• MARPA targets.
• VRM/EBL markers
Typically, your vessel's position is at the center of the
display, and its dead ahead bearing is indicated by a
vertical heading line, known as the Ship's Heading
Marker (SHM).
5 6 7 8
14 15
a Series / c Series / e Series
9
D12207-2