Rf Exposure; Fcc; Compliance Statement (Part 15.19); Fcc Interference Statement (Part 15.105 (B)) - Lighthouse a65 Installation And Operation Instructions Manual

RF exposure

This equipment complies with FCC / IC RF exposure
limits for general population / uncontrolled exposure.
The wireless LAN / Bluetooth antenna is mounted
behind the front facia of the display. This equipment
should be installed and operated with a minimum
distance of 1 cm (0.39 in) between the device and
the body. This transmitter must not be co-located
or operating in conjunction with any other antenna
or transmitter, except in accordance with FCC
multi-transmitter product procedures.

FCC

Compliance Statement (Part 15.19)

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference
received, including interference that may cause
undesired operation.
FCC Interference Statement (Part
15.105 (b))
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment
and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio / TV
technician for help.

Industry Canada

This device complies with Industry Canada
License-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference; and
14
2. This device must accept any interference,
including interference that may cause undesired
operation of the device.
This Class B digital apparatus complies with
Canadian ICES-003.
Industry Canada (Français)
Cet appareil est conforme aux normes d'exemption
de licence RSS d'Industry Canada.
Son fonctionnement est soumis aux deux conditions
suivantes:
1. cet appareil ne doit pas causer d'interférence, et
2. cet appareil doit accepter toute interférence,
notamment les interférences qui peuvent affecter
son fonctionnement.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.

Japanese approvals

In the frequency band used for this device, campus radio
stations (radios stations that require a license) and specified
low power radio stations (radio stations that do not require
license) for mobile identification and amateur radio stations
(radio stations that require license) used in industries such as
microwave ovens, scientific, medical equipment devices and
production line of other factories are also being operated.
1. Before using this device, please make sure that campus
radio stations and specified low power radio stations for
mobile identification and amateur radio stations are not
being operated nearby.
2. In case there is any case of harmful interference to
campus radio stations for mobile identification caused by
this device, please immediately change the frequency
used or stop the transmission of radio waves and then
consult about the measures to avoid interference (for
example, the installation of partitions) through the contact
information below.
3. Besides, when in trouble, such as when there is any
case of harmful interference to specified low power
radio stations for mobile identification or amateur radio
stations caused by this device, please consult through
the following contact information.
Contact information: Please contact your local authorized
Raymarine dealer.
Third party software license
agreements
This product is subject to certain third party software
license agreements as listed below:
• GNU — LGPL/GPL
• JPEG libraries
• OpenSSL
• FreeType
a Series / c Series / e Series