Flexfx; Core Audio And Asio Drivers; Asio (Windows); Core Audio (Macintosh) - Rane SIXTY-ONE Operator's Manual

FLEXFX

The FlexFx Bus in the Sixty-One works
differently than a typical effects insert loop. This
architecture is very flexible and opens up many
new possibilities not possible with simple effect
insert designs found on other mixers.
The FlexFx Bus is more like an auxiliary
bus that can have multiple signals assigned
to it. Signals assigned to the bus may then
have external analog effects and external USB
effects applied in any combination. The order
of processing in the FlexFx Bus is shown in the
graphic below.
1. FLExFx buttons for PGM 1, PGM 2, MIC and
AUx assign signals to the FlexFx Bus
BLUE) or the Main Mix (dim
assigning multiple inputs to the FlexFx Bus
and/or changing the assignment without
interrupting audio.
2. ANALOG INSERT is turned on/off with a separate
button. The external analog insert can be
used with the INSERT or independently.
NOTE: If no external connection is made to
the FLExFx LOOP RETURN jack, the signal will be
interrupted when the ANALOG INSERT button is
turned on.
1
PGM 1 FLEXFX
PGM 2 FLEXFX
MIC FLEXFX
AUX FLEXFX
10
3. The
separate button, used with the ANALOG INSERT
or independently. The
record pair 9-10 for the Send, and USB
playback pair 7-8 for the Return. Using the
INSERT generally requires a low latency
setting.
PAGE 36.
NOTE: Assign a PGM channel or signal
to FLExFx before engaging the
button to avoid audible artifacts.
Enable Mixer DJ-FX must be checked in
the setup screen to use the
Scratch Live DJ-FX. NOTE: If no connection
(BRIGHT
is made in Scratch Live between the USB
blue). This allows send and USB return or "Enable Mixer
DJ-FX send" is not checked in Scratch
Live, the signal will be interrupted when
the
SEE "ENABLE DJ-FX" ON PAGE 39.
SEE "DJ-FX PLUGIN" ON PAGE 27
4. The FlexFX CUE is after the analog external
insert, USB insert and before the WET / DRy
control. This allows cueing a Wet signal while
listening to the Dry signal before fading up to
Wet.
2
SEND
Record
RIGHT LEFT
SEND
RETURN RETURN
ANALOG INSERT
RETURN
Playback
RIGHT LEFT
INSERT is turned on/off with a
INSERT uses USB
SEE "USB BUFFER SIzE (LATENCy)" ON
INSERT with
INSERT button is turned on.
.
3 4
USB
DRY
WET
SEND
CUE
INSERT
FLEXFX
USB
RANE SIXTY-ONE
CORE AUDIO AND
ASIO DRIVERS
INSERT
The Scratch Live installer includes drivers that
allow you to use your Rane Sixty-One with other
audio applications. The Core Audio (Mac) and
ASIO (PC) drivers will be installed automatically
when you install Scratch Live with your hardware
connected.
Once installed, you will have the option to use
the Sixty-One with 3rd party DAWs using ASIO or
Core Audio interfaces. NOTE: These drivers only
work with audio applications that are compatible
with these audio standards.

ASIO (WINDOWS)

The Sixty-One uses a low-latency ASIO device
driver to interface with software applications
other than Scratch Live on Windows operating
systems. Multi-client ASIO allows different audio
software applications to simultaneously stream
audio to and from the Sixty-One. If the same
playback channel is selected in more than one
application, the driver mixes the audio from the
applications before streaming it to the device.
The driver Control Panel may be launched
Main from the Windows Control Panel. Select Start >
Mix
Control Panel > Rane Sixty-One.
Cue
Bus
FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.4