Playback Control; The Control Record; The Control Cd; Vinyl Scroll - Rane SIXTY-ONE Operator's Manual

PLAyBACk CONTROL

THE CONTROL RECORD

The control record has two sides. The first side
is 10 minutes long and contains the Vinyl Scroll
section. The second side is 15 minutes long.
Scratch Live can be configured to work with
records playing at either 33 RPM or 45 RPM,
depending on your preference. The record has
thin marks every minute, and a thicker mark
every 5 minutes (when playing at 33 RPM).
These marks are to assist you when using needle
dropping to move through the track. These
marks do not affect the playback of the track.
The mode will switch when it reaches the
end of the record so your track won't stop.
"ABSOLUTE MODE" ON PAGE 21.
RANE SIXTY-ONE FOR SERATO SCRATCH LIVE

THE CONTROL CD

The control CD has
two tracks. The first
track is 15 minutes
long and controls
playback. The second
track is 40 seconds
long and controls vinyl
scroll.

VINyL SCROLL

Vinyl Scroll allows you to select and load tracks
using only your turntables (or CD player) – no
contact with the computer necessary! To use
Vinyl Scroll with turntables, lift the needle off
the record and drop it into special "bonus track"
section at the end of the record's A side. The
movement of the control disk now controls the
selected track within your library. Lift the needle
out of the Vinyl Scroll section of the record and
into the lead out (between the Vinyl Scroll area
and the end of the record) to change crates or
iTunes playlists. Go back to the Vinyl Scroll area
of the record to choose a track within the crate or
playlist. Once you have found the track you wish
to play, put the needle back at the beginning of
the record and it will load automatically.
SEE
This feature is available to CD users. Go to
track 2 on the control CD to access Vinyl Scroll.
Find the track you want to load, and go back to
track 1. The track you selected will be loaded
and ready to play. You can reverse the direction
of Vinyl Scroll and set the sensitivity in the Setup
screen.
TIP: you can also use Vinyl Scroll in the
Prepare window.
SEE THE OPTIONS FOR "VINyL
CONTROL" ON PAGE 38
• OPERATOR'S MANUAL 2.4
.
17