Windows; Additional Windows Drivers; Starting The Software; Installing More Than One Version - Rane SIXTY-ONE Operator's Manual

WINDOWS

It is important that Windows users install the
Sixty-One drivers as well as the Scratch Live
software. The easiest way to do this is to allow
the Scratch Live installer to do all the work.
1. Connect your Sixty-One before you insert
your installation CD. When you first connect
it, Windows will attempt to install the drivers
via the hardware wizard. Cancel and close the
hardware wizard.
2. Insert the Software Installation CD-ROM.
Make sure your Sixty-One is connected first. If
a window doesn't open automatically, browse
to the CD drive. Run setup.exe.
or
Launch the installer you just downloaded from
serato.com.
3. Follow the on-screen instructions. Once the
installation is complete, Scratch Live appears
in the Start Menu under All Programs > Serato
> Scratch Live.
Because the Sixty-One was connected prior
to installing Scratch Live, no extra hardware
installation is required.

ADDITIONAL WINDOWS DRIVERS

Once Scratch Live is installed, any additional
hardware that is connected will be recognized
and the drivers will be automatically installed.
RANE SIXTY-ONE FOR SERATO SCRATCH LIVE

STARTING THE SOFTWARE

Close all other programs on your Mac or PC.
When you load Scratch Live for the first time,
you will see the screen shown above.

INSTALLING MORE THAN ONE VERSION

Installing a new version will by default overwrite
any previous version you had installed, however
it is easy to have more than one version of
Scratch Live installed if you wish.
Mac users: before installing, find the Scratch Live
application (by default it is in the Applications
folder), and rename it - for example Scratch
Live 2.0.0. When you install the new version,
the old application will not be overwritten, and
you can choose which version you want to run
by going into the folder and double clicking
on the application. You can also do this if you
have already installed the latest version - just
rename the application (eg. to Scratch Live
2.1.1), and then reinstall the earlier version.
Windows Users: before installing, find the
Scratch Live executable (by default it is in
C:\Program files\Serato\ScratchLIVE),
rename it - for example Scratch Live 2.0.0.exe.
When you install the new version, the old
executable will not be overwritten, and you
can choose which version you want to run by
going into the folder and double-clicking the
executable. You can also do this if you have
already installed the latest version — just
rename the executable (eg. to Scratch Live
2.1.1.exe), and then reinstall the earlier version.
• OPERATOR'S MANUAL 2.4

FIRMWARE CHECk

On occasion new
included within Scratch Live software updates.
After updating, run Scratch Live and click the
Hardware tab in the Setup screen to see if
new firmware is installable.
FIRMWARE" ON PAGE 36.
If you're using the TTM 57SL and/or Sixty-
One mixers at various clubs, you may come
across one that has a newer version of firmware
installed. With the newer firmware, the mixer will
still be usable with older Scratch Live versions,
but certain features may not work as expected.
To avoid this situation, make sure you always
have the latest version of Scratch Live installed.

USING THE TOOL TIPS

Click on the ? icon to enable tool tips. Tool tips
provide a handy way to learn the various features
of Scratch Live. Move the mouse over a section
of the screen to bring up a context-sensitive
tool tip. Holding the mouse over the ? button
with tool tips turned on will show you a list of
all keyboard shortcuts. Tool tips are available in
several languages. Scratch Live will display the
tool tips in the language that your computer is
set to. If your language is not available, the tool
tips will be displayed in English.
and
firmware updates are
SEE "UPDATING
13