Include Subcrate Tracks; Autofill Overviews; Font Size; Album Art Size - Rane SIXTY-ONE Operator's Manual

INCLUDE SUBCRATE TRACkS

You can drag crates into other crates to make
subcrates. If you have this option turned on,
any crate will also display the contents of all its
subcrates.
SEE "ORGANIzING yOUR MUSIC" ON
PAGE 29.

AUTOFILL OVERVIEWS

Enable this option to automatically generate the
track overview as soon as a track is loaded. If
this setting is disabled, the track overview will
be generated as the track plays. Automatically
generating the track overview uses more of the
computer's CPU power, and should be disabled
on slower computers.
TIP: Analyze your files before you play to
pre-build all your overviews.
yOUR FILES" ON PAGE 16.

FONT SIzE

Adjust this slider to increase and decrease the
font size for the main library and crates area.
TIP: you can also use the keyboard shortcuts
ctrl + and ctrl – to increase and decrease the
font size.

ALBUM ART SIzE

Adjust this slider to set the maximum album art
size for any of the album art display modes. The
artwork will still get larger if required to fit the
track and will still scale with the library zoom
keyboard shortcut.
RANE SIXTY-ONE FOR SERATO SCRATCH LIVE

DISPLAy

MAXIMUM SCREEN UPDATES

This slider allows you to throttle back the screen
refresh rate. Users with slower computers might
like to do this if they are having performance
issues. It could also be useful if you want to limit
Scratch Live's processor usage, for example if
you are running a recording program at the same
time. The default setting is 60 Hz, or refreshed
60 times per second. This setting applies to
SEE "PREPARING
the entire screen (i.e. the Virtual Decks, the
Waveforms, the Library, and the Setup screen).

AUDIO CACHE

Use this slider to set the amount of audio that
is loaded into memory. A small audio cache will
place less load on your computer, and the tracks
will load faster. A large audio cache will give you
a bigger view of the waveform when the main
waveform view is zoomed out. The default is 15
seconds.

SHOW ALBUM ART ON DECk

Check this option to show the album art for your
song next to the track information display on
each Virtual Deck.
• OPERATOR'S MANUAL 2.4

PLUGINS

ENABLE SP-6 SAMPLE PLAyER

Use the check box to enable and disable the
SP-6 sample player plugin. The SP-6 is enabled
by default.

ENABLE DJ-FX

Use the check box to enable and disable the
DJ-FX plugin. The DJ-FX plugin is disabled by
default.

ENABLE MIXER DJ-FX SEND

Check this box to insert DJ-FX into the FlexFX
loop of your mixer. This allows you to assign
the software DJ-FX to the Virtual Decks using
hardware controls. DJ-FX are post-fader.
Press the INSERT button on the mixer to
enable the software FlexFX loop, and then use
the corresponding channel FlexFX buttons to
insert DJ-FX.

ENABLE SERATO PLAyLISTS

Use the check boxes to enable and disable the
Serato Playlists plugin and the Live Playlists
feature. These are disabled by default.

ENABLE LIVE PLAyLISTS

With this box is checked, and an active internet
connection, the Start Live Playlist button in the
History panel transmits what you are playing in
real time to your serato.com profile. An internet
connection could result in USB dropouts,
therefore you may wish to leave this unchecked.

SERATO VIDEO

This optional software plugin for Scratch Live
adds the ability to play and mix video files.
Serato Video is supported and available only
from serato.com.
39