Vinyl Control; Adjust Loops With Vinyl; Next Song On Flip; Enable Vinyl Scroll - Rane SIXTY-ONE Operator's Manual

VINyL CONTROL

ADJUST LOOPS WITH VINyL

Loop end points can be adjusted using the
control vinyl. Disable this option if you wish to
use the computer's arrow keys to adjust loops,
and keep audio playback controlled by the vinyl.
SEE "LOOPING" ON PAGE 23.

NEXT SONG ON FLIP

When this option is enabled, changing the side
of control vinyl you're using ('flipping the record')
loads the next song.

ENABLE VINyL SCROLL

Uncheck this box to disable the Vinyl Scroll
feature.
SEE "VINyL SCROLL" ON PAGE 17

REVERSE VINyL SCROLL

This setting allows you to reverse the direction of
Vinyl Scroll.
SEE "VINyL SCROLL" ON PAGE 17.

VINyL SCROLL SPEED

Vinyl Scroll allows you to load a new track without
touching the computer, by lifting the needle and
placing it in the special section of side A of the
control record. This setting allows you to adjust
the sensitivity of Vinyl Scroll, so that you can
control the amount of record movement required
to move between tracks.

DROP TO ABSOLUTE POSITION

(Relative Mode)
This detects a deliberate repositioning of the
needle, and moves the playhead to the needle's
absolute position, as if it were in ABS mode.
Accidental skipping of the needle does not
reposition the playhead. (REL mode only)
38

DROP TO CUE POINTS

(Relative Mode)
This option triggers the corresponding cue point
when the needle is repositioned into one of the
first five one-minute sections on the control vinyl.
For instance: needle dropping into the second
minute on the left turntable will send playback
for Deck 1 to cuepoint 2, if that cuepoint is set.
(REL mode only)

VINyL START OFFSET

If there is cue burn at the beginning of the vinyl,
you will notice that the tracking will be poor at
this point. Use the two knobs to offset the start
point, so that the track will start playing from
a point further into the control record. The first
knob sets the number of whole minutes to offset
by, the second knob sets the number of whole
rotations within that minute.

LIBRARy

.

READ iTUNES LIBRARy

Check this option to show your iTunes library
and playlists in Scratch Live. You can collapse
your iTunes playlists by clicking on the
blue folder icon.
Uncheck this option to remove iTunes playlists
and iTunes songs from your Scratch Live library.
To add your iTunes music to your Scratch Live
library permanently, drag and drop tracks from
the iTunes playlists onto the
the far left hand side of the Scratch Live screen),
or into individual Scratch Live crates.
Any files moved to
or a new crate will now remain in Scratch Live
even when the Read iTunes library option is
unchecked. Once a file has been permanently
added to Scratch Live, the iTunes logo will
disappear.
All..." icon (on
"
" All...," an existing crate,
RANE SIXTY-ONE FOR SERATO SCRATCH LIVE
We recommend unchecking this option after
you have added your music into the Scratch Live
library.
NOTES:
• If your iTunes library contains a large number of
tracks it may take some time for Scratch Live
to read it.
• Any changes made in Scratch Live to the file
information of tracks in your iTunes library will
not appear in iTunes until after you play the
track.
• Scratch Live cannot play files that have been
protected by Digital Rights Management
systems, such as those previously sold
through the Apple iTunes Music Store. iTunes
Plus files are DRM-free.
• iTunes is available for Mac and PC. To get
more information, visit www.apple.com.

PROTECT LIBRARy

Uncheck this option to remove files and crates
from your library. Check this option to lock
your library and prevent accidental file or crate
deletion while using Scratch Live. Enabling this
option will also lock all file tags and crate names,
so that no text can be changed.

CUSTOMIzE CRATE VIEWS

Check this option to set custom column views
for each crate and playlist. When the option is off
(default), all crates will share the same column
configuration as the " All..." crate.

CENTER ON SELECTED SONG

With this option on, scrolling up and down in your
library holds the selected track in the middle of
the library panel.

SHOW ALL FILE TyPES

Enable this option to show all files when
importing tracks into Scratch Live. If this option
is unchecked, only files that Scratch Live can
play will be displayed.
• OPERATOR'S MANUAL 2.4