Greasing The Steering Head Bearing; Removing The Front Fender; Installing The Front Fender; Loctite - KTM 250 EXC-F Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.18

Greasing the steering head bearing

12.19

Removing the front fender

12.20

Installing the front fender

–
Mount and tighten screw
Guideline
Screw, top steering stem
Finishing work
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
(EXC‑F EU/AU/BR, XCF‑W)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
(EXC‑F Factory Edition, EXC‑F Six Days)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
800010-10
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
L02485-10
–
Remove screws
B01603-11
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
L02485-10

.
M8
p. 58)
( p. 52)
( p. 54)
( p. 53)
( p. 56)

.

. Remove the front fender.
17 Nm

Loctite

(12.5 lbf ft)
p. 48)
p. 92)

.
M6 10 Nm (7.4 lbf ft)
60
® 243™