7
SPEEDOMETER
7.7
Display mode SPEED (speed)
7.8
Display mode SPEED/H (service hours)
7.9
Setup menu
–
Repeatedly press the button
display.
–
Briefly press the button
LAP 1 appears on the left side of the display.
–
The laps 1–10 can be viewed with the button
–
Press and hold the button
–
Briefly press the button
Next display mode
400321-01
Info
When a signal from the wheel speed sensor arrives, the left side of the dis-
play changes back to the SPEED mode.
–
Repeatedly press the button
display.
The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.
Info
Making the setting according to the country.
When an impulse comes from the front wheel, the left side of the speedometer
display changes to the SPEED mode and the current speed is shown.
400317-02
Condition
•
The motorcycle is stationary.
–
Repeatedly press the button
display.
In display mode H, the service hours of the engine are displayed.
The service hour counter stores the total traveling time.
Info
The service hour counter is necessary for ensuring that service work is carried
out at the right intervals.
400316-01
If the speedometer is in H display mode at the start of the journey, it automati-
cally changes to the ODO display mode.
The H display mode is suppressed during the journey.
Press the button
for 2–3 seconds.
Briefly press the
button
.
Press the button
for 2–3 seconds.
Briefly press the
button
.
Condition
•
The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Press the button
The Setup menu displays the active functions.
Info
Repeatedly press the button
400344-01
If no button is pressed for 20 seconds, the settings are automatically stored.
briefly until LAP appears at the bottom right of the
.
for 3–5 seconds to clear the lap times.
.
briefly until SPEED appears on the left side of the
briefly until H appears at the bottom right of the
The display changes to the Setup menu of the speedometer
functions.
Next display mode
No function
No function
briefly until H appears at the bottom right of the
for 2–3 seconds.
briefly until the desired function is opened.
.
23