12
SERVICE WORK ON THE CHASSIS
12.5
Loosening the fork protector
12.6
Positioning the fork protector
12.7
Removing the fork legs
–
Remove screws
–
Remove screws
–
Remove the screws on the right fork leg. Push the fork protection downwards.
M00094-10
–
Position the fork protector on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
–
Position the fork protector on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
M00094-11
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove the cable binder(s).
–
Remove screws
–
Allow the brake caliper and brake line to hang tension-free to the side.
M00235-10
(EXC‑F EU/AU/BR, XCF‑W)
–
Release screws
–
Release screws
M00145-10
(EXC‑F Factory Edition, EXC‑F Six Days)
–
Release screws
–
Release screws
M00138-10
and take off the clamp.
on the left fork leg. Push the fork protection downwards.
(
p. 84)
and take off the clamp.
and take off the brake caliper.
. Take out the left fork leg.
. Take out the right fork leg.
. Take out the left fork leg.
. Take out the right fork leg.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 92)
p. 48)
50
.
.