12
SERVICE WORK ON THE CHASSIS
12.9
Removing the fork protector
12.10
Installing the fork protector
12.11
Removing the lower triple clamp
–
Position the brake caliper and mount and tighten screws
Guideline
Screw, front brake caliper
–
Mount cable binder.
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
M00234-10
Finishing work
–
Install the front wheel.
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
Main work
–
Remove screws
–
Remove the screws on the right fork leg. Remove the fork protector upwards.
101327-10
Main work
–
Position the fork protector on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the fork protector on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
101327-10
Finishing work
–
Install the fork legs.
–
Install the front wheel.
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
(EXC‑F EU/AU/BR, XCF‑W)
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the front fender. (
–
Remove the handlebar cushion.
M8
(
p. 84)
p. 94)
(
p. 84)
(
p. 50)
on the left fork leg. Remove the fork protector upwards.
(
p. 51)
(
p. 84)
p. 94)
(
p. 84)
(
p. 50)
p. 60)
.
25 Nm
Loctite
(18.4 lbf ft)
p. 93)
p. 92)
p. 48)
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 93)
p. 92)
p. 48)
52
®
243™
.
.