Table of Contents
Advertisement
No.
Name
1
Function Keys
2
ON/OFF Key
3
ZERO Key
4
Backlight Key
2.1 Calibrator Display
The Calibrator Display consists of two regions: The menu bar
(located along the bottom of the screen) is used to access a menu
system. The main display (the rest) consists of up to three process
measurement sub-regions. These sub-regions will henceforth be
referred to as the UPPER, MIDDLE and LOWER displays. Figure 3
shows the location of the different display fields while table 3
describes them.
Figure 2
Keypad
Table 2 Key Functions
Description
These keys are used in various ways, primarily to
configure the calibrator
This key is used to turn the calibrator on and off
This key is used to zero pressure measurements
This key is used to turn the backlight on and off
5
Advertisement
Table of Contents
