Set The Parameters Of Non Movement Detection - Queclink GL300 User Manual

GL300 Manage Tool User Guide

3.2.8 Set the parameters of Non Movement Detection

Step_1
Step_2
Step_1: Select "Non Movement Detection", after that the parameters of GTNMD show in
Command Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
Step_3: It is recommended to read the parameters from GL300 and edit based on them.
Step_4: Set the Non Movement Detection parameters. Please refer to "GL300 @Track Air
Interface Protocol" for the meaning of each parameter.
Step_5: Click the "Send" button; download the parameters of GTNMD to GL300.
TRACGL300MT001
and displayed here. Please note this command message can also be sent to GL300
through SMS or GPRS.
Step_4
Step_3
Step_5
- 26 -