Set The Parameters Of Quick Start Setting - Queclink GL300 User Manual

GL300 Manage Tool User Guide

3.2.3 Set the parameters of Quick Start Setting

Step_1
Step_2
Step_1: Select "Quick Start Settings", after that the parameters of GTQSS show in Command
Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
and displayed here. Please note this command message can also be sent to GL300
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL300 and edit based on them
Step_4: Set the GPRS and backend server information parameters. Please refer to "GL300
@Track Air Interface Protocol" for the meaning of each parameter.
Step_5: Click the "Send" button; download the parameters of GTQSS to GL300.
TRACGL300MT001
Step_4
Step_3
Step 5
- 21 -