Introduction; Purpose; Digital Document; Intended Audience - Bosch Plena Installation And User Instruction Manual

Plena Voice Alarm System | Installation and User Instructions | Introduction
1

Introduction

1. 1

Purpose

The purpose of the Installation and User Instructions
Manual is to provide information required to install,
configure, operate and maintain a Plena Voice Alarm
System. A Plena voice alarm controller (system
controller) forms the heart of a Plena Voice Alarm
System. Unlike a basic system (see also the Basic System
Manual, 9922 141 10361), a Plena Voice Alarm System
may be configured, using all available units of the Plena
product line, including one or more routers, call stations
and call station extensions, to simultaneously serve and
manage up to 60 loudspeaker zones.
A Plena Voice Alarm System can be extensively
configured from a PC, running the Configuration
Software. How to use this software is described in the
Configuration Software Manual (9922 141 10381). In
this manual the Plena Voice Alarm System is further
referred to as "system".
1.2

Digital document

This Installation and User Instructions Manual is also
available as a digital document in the Adobe Portable
Document Format (PDF). All references to pages,
figures, tables, etc. in this digital document contain
hyperlinks, to quickly consult the referenced location.
1.3

Intended audience

This Installation and User Instructions Manual is
intended for installers and users of a Plena Voice Alarm
System.
1.4

Related documentation

The following related documents are available:
• Basic System Manual (9922 144 10361).
• Configuration Software Manual
(9922 144 10381).
Bosch Security Systems | 2004-06 | 9922 141 10371en
1.5

Alerts

In this manual, four types of alerts are used. The alert
type is closely related to the effect that may be caused
when it is not observed. These alerts - from least severe
effect to most severe effect - are:
• Note
Alert containing additional information. Usually, not
observing a note alert does not result in damage to
the equipment or personal injuries.
• Caution
The equipment can be damaged if the alert is not
being observed.
• Warning
Persons can be (severely) injured or the equipment
can be seriously damaged if the alert is not being
observed.
• Danger
Not observing the alert can result in death.
In this manual, the following indicators are used for
alerts:
Note
General sign for notes.
Note
Consult the indicated source of information.
Caution, Warning, Danger
General sign for cautions, warnings and
dangers.
Caution, Warning, Danger
Risk of electric shock.
Caution, Warning, Danger
Risk of electrostatic discharges.
en | 9