Leica Sprinter 150 User Manual page 23

Operation message
Download Completed!
No Data In Memory!
Delete. Are You Sure?
Data Deleted!
Can't Delete!
Change BM. Are You Sure?
Change Design Elevation. Are
You Sure?
Wait! File System Clean Up!
Shut Down!
Sand Clock Icon
Meas Target
Setting...
Change Point not completed! Quit
Application?
Quit This Application?
Operation Messages
Counter measure / remark
System is successfully downloaded the internal memory data to an external device.
No data is stored in the internal memory.
Questionnaire prompted user to confirm the deletion of a data (in View Data mode) / all the data (in Delete
All Data mode) in the internal memory.
System confirmation a data or all the data in the internal memory is deleted.
Reference Benchmark and line levelling measurement not allowed to be deleted by single data deletion method.
Question to prompt user if changing of Reference Benchmark elevation to confirm.
Question to prompt user if changing of Design elevation to confirm.
Cleaning up of temporary files/system files.
System is switching OFF.
Please wait! System task is in progress.
Aim to target staff and press measuring button.
System parameter setting in progress.
Prompt message to quit application during line levelling process. Complete current line levelling change point
measurements, then leave the application program. Pressing ENTER key to quit application; otherwise,
press ESC key to return to current application.
Prompt message to quit current application, pressing ENTER key to quit application; otherwise, press ESC
key to return to current application.
20
Sprinter 150/150M/250M - 1.0.0en
EN
DE
FR
ES
IT
PT
NL
NO
SV
FI
DA