Management; Snmp Settings - NETGEAR WG102-500 Reference Manual

WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual

SNMP Settings

Upon selecting SNMP Server Settings from the navigation bar on the left side of the main menu,
the following screen is displayed to enable the configuration of SNMP server settings:
Figure 3-1
Table 3-1 shows the SNMP settings.
Table 3-1. SNMP Settings
Field
Server Name
SNMPv1
SNMPv2
SNMPv3
SNMP Trap

Management

Descriptions
The name that identifies the SNMP server. The default name is Netgear.
Select the Enable check box to enable support for of SNMP version 1.
Select the Enable check box to enable support for of SNMP version 2.
Select the Enable check box to enable support for of SNMP version 3.
Select the Enable check box to enable SNMP traps.
v1.0, February 2009
Chapter 3
Management
3-1