WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual
802.11 b/g Profile
Figure 2-5
Table 2-5
shows the 802.11b/g profile settings.
Table 2-5. 802.11b/g Profile Settings
Field
Radio Policy
Country
RF Channel
Tx Output Power
Antenna Selection
Advanced Settings
The advanced settings provides more options to fine-tune the parameters on the system to achieve
the optimal performance.
2-6
Descriptions
This pulldown menu allows you to make one of the following selections:
• 802.11b/g. Also referred to as Mixed Mode. The wireless access point accepts
both 802.11b and 802.11g client association requests.
• 802.11b Only. The wireless access point accepts 802.11b client association
requests only.
• 802.11g Only. The wireless access point accepts 802.11g client association
requests only.
This pulldown menu allows you to specify the country/region.
This pulldown menu allows you to specify the 802.11 channel. The available
options for 802.11b or 802.11g are from 1 to 11, and from 1 to 13 for the country
setting of Default (US) and Europe, respectively.
This pulldown menu allows you to specify the transmission power. The available
options are from 27 dBm to 18 dBm. By default, the Tx Output Power is 20 dBm.
Note: Please make sure that you comply with the regulatory requirements for total
RF output power in your country.
This menu selection applies only to outdoor antennas and is not applicable to the
WG102-500, WGAP150.
v1.0, February 2009
Configuration