Table of Contents
Advertisement
WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual
Table 2-7. Neighbor AP DIscovery, Ethernet, and Schedules Task Settings (continued)
Field
Ethernet Settings
Speed
Scheduled Tasks
Reboot
Auto Channel Selection Based on the set schedule, and when no clients are associated with the wireless
Wireless Networks Settings
When you select Wireless Networks under the Configure section on the navigation bar on the left,
the general wireless network settings are displayed, which are shown in
Table 2-8. General Wireless Network Settings
Field
WLAN SSID
Default VLAN ID
Admin Status
Security Policies
BSSID
Configuration
Descriptions
Select the Ethernet speed from the pulldown menu.
Based on the set schedule, the system reboots automatically.
access point, the system performs auto channel selection to avoid congested
channels.
Descriptions
The SSID of the virtual Access Point.
This setting specifies the VLAN ID to be tagged on all outgoing packets generated
from the virtual AP (i.e. packets that travel from the Wi-Fi segment, through the
wireless access point to Ethernet segment via the LAN port).
If 802.1x is enabled, a per-user VLAN ID can be specified in the authentication
reply from the Radius server. If this is set, the value specified via Default VLAN ID
will be overridden.
The status of the virtual AP: enabled or disabled.
The configured wireless authentication and encryption methods.
The detailed BSSIDs
v1.0, February 2009
Table
2-8.
2-9
Advertisement
Table of Contents
