Table of Contents
Advertisement
WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual
Table 2-11. Static WEP Settings (continued)
Field
Encryption Key
Shared Key
Authentication
802.1x Parameters
For the
"Security
Policy" setting (see
802.1x Parameters screen displays.
Figure 2-11
The configuration of 802.1x parameters enables Radius-based 802.1x authentication with a
dynamic WEP key.
Table 2-12
Table 2-12. 802.1x Settings
Field
Key Size
Re-keying Period
2-14
Descriptions
Enter an encryption key value:
• For ASCII format, a key length of either 5 or 13 characters.
• For HEX format, a key length of either 10 or 26 characters.
Select this check box to enable shared key authentication. Open authentication is
the default authentication.
Table 2-9 on page
shows the 802.1x settings.
Descriptions
This pulldown menu allows you to make one of the following selections:
• 40 bits (64-bit WEP).
• 104 bits (128-bit WEP).
The length of time throughout which the broadcast key remains valid. Upon
expiration of the re-keying period, the broadcast key is no longer valid and
renewal of the broadcast key is required. The default is 14400 seconds (i.e.
4 hours). A value of 0 disables re-keying.
v1.0, February 2009
2-10), when you select 802.1x, the
Configuration
Advertisement
Table of Contents
