Dhcp Server Parameters - NETGEAR WG102-500 Reference Manual

802.11g wireless access point
Hide thumbs Also See for WG102-500:
Table of Contents

Advertisement

WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual

DHCP Server Parameters

For the
"DHCP Server
DHCP Server Parameters screen displays.
Figure 2-8
Table 2-10
shows the DHCP server settings.
Table 2-10. DHCP Server Settings
Field
IP Start Range
IP Stop Range
Subnet Mask
Broadcast Address
Gateway
DNS 1
DNS 2
DNS 3
Domain
Lease Time
2-12
Type" setting (see
Table 2-9 on page
Descriptions
The first address in the range of IP addresses to be assigned to DHCP clients.
The last address in the range of IP addresses to be assigned to DHCP clients.
The subnet mask to be used by DHCP clients.
The broadcast address to be used by DHCP clients.
The default routing gateway to be used by DHCP clients.
The IP address of the primary DNS server to be offered to DHCP clients.
The IP address of the secondary DNS server to be offered to DHCP clients.
The IP address of the tertiary DNS server to be offered to DHCP clients.
The domain name of the Wi-Fi segment.
The length of time throughout which an IP address of a DHCP client remains valid.
Upon expiration of the lease time, the assigned IP address is no longer valid and
renewal of the IP address assignment is required.
v1.0, February 2009
2-10), when you select Server, the
Configuration

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgap150 prosafe

Table of Contents