WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual
Commands
Upon selecting Commands from the navigation bar on the left side of the main menu, the
Commands screen is displayed:
Figure 3-5
Table 3-4
shows the commands.
Table 3-4. Commands
Field
Save Current
Configuration to Flash
Download Active
Configuration
Upload Configuration
Upgrade Firmware
Management
Descriptions
Changes made are not saved to the flash memory; as a result, the current
configuration will be lost after a reboot. Select this radio button to make the current
configuration persistent across reboots.
Select this radio button to download the active configuration for backup purposes.
Select this radio button to upload the configuration from a back-up configuration
file. The configuration changes become effective only after you have selected the
Activate Changes radio button (see below).
Select this radio button to upload a firmware file for upgrading the wireless access
point's software. A reboot is required after upgrading the firmware.
v1.0, February 2009
3-5