Installing The Y Connector (Optional) - Piazzetta P963 Instructions For Installation, Use And Maintenance Manual

5.4 INSTALLING THE Y CONNECTOR (OPTIONAL)

• The ducting of heat to adjoining rooms is at the user's discretion
according to requirements.
• The Y connector, designed to double hot air delivery, may be fi tted
onto one or both fans at the time the stove is installed.
• If just one Y connector is used, it is more convenient to fi t it onto the
right fan (as seen from the rear). If two Y connectors are to be used,
fi rst work on the left fan and then on the right (as seen from the rear
fi g. 47).
To install, proceed as follows:
- disconnect from the main power supply before opening the appliance;
- remove the rear panel of the stove;
- uncoil the hose from the appropriate fan outlet by loosening the clip
that holds it in place (Fig. 48);
- cut off approx. fi ve cm of hose (Fig. 49);
- fi t the hose to the Y connector using the clip provided in the kit (Fig.
50);
- fi t the Y connector to the fan outlet using the screws provided in the
kit (Fig. 51);
- fi t the second hose to the Y connector using the clip provided in the
kit (Fig. 52);
- repeat steps 3 ÷ 7 for the other fan if two Y connectors are being
used;
- remove the knockout from the rear panel (Fig. 53) and insert the
ducting through the hole that has been created;
- refi t the rear panel;
- move the stove closer to the wall (Fig. 54) and, using the clips provided
in the kit, fi x the two hoses to the walled ducting fi ttings (Fig. 55);
- put the stove in its fi nal location, complying with the minimum
safety distances (see par. 1.8).
22
Fig. 47
Fig. 48
Fig. 50
Fig. 52
Fig. 54
H07025410 / DT2000678 – 00
Left fan
Fig. 49
DT2031048-00
Fig. 51
DT2030175-00
Fig. 53
DT2030178-00
Fig. 55
DT2030180-00
DT2010148-04
Right fan
DT2030229-01
DT2030230-00
DT2030232-00
DT2032947-00
DT2030181-00