Installation; Multifuoco System - Piazzetta P963 Instructions For Installation, Use And Maintenance Manual

5.0 INSTALLATION

Pursuant to current regulations on the safety of electrical equipment, you must contact a Piazzetta After-Sales Service Centre or a qualifi ed electrician
for all and any work connected with installation, maintenance or servicing that involves access to electrical parts.
Cladding
• Having completed assembly of the stove and installed any external room thermostat, proceed with assembly of the stove cladding, referring to the
ceramic cladding instruction booklet provided with the stove.

5.1 MULTIFUOCO SYSTEM

• Thanks to Piazzetta technology and R&D, this pellet stove offers the
advantages of the "Multifuoco system", a system EXCLUSIVE to and
PATENTED by Gruppo Piazzetta S.p.A., a true innovation in the fi eld of
pellet stoves.
• The "Multifuoco system" revolutionises all methods of heat circulation
currently in use in pellet stoves: the heat produced by the fi rebox is
not only circulated from the lower part of the stove into the room, but
hot air can also be ducted via Ø 75 mm hoses to adjoining rooms (Fig.
26).
This exclusive fl oor-standing heat distribution system offers notable
advantages: even spread of temperatures (Fig. 25).
The hot air produced is propelled by two fans and distributed via the
grille at the back of the stove.
• The front grill is equipped with two defl ectors (Fig. 27) to change the
direction of the heat current as it exits the front of the stove. To defl ect
the heat current in the desired direction simply adjust the angle of the
defl ectors (Fig. 28) using the lever provided (Fig. 29).
18
Fig. 25
Fig. 26
Fig. 27
H07025410 / DT2000678 – 00
DT2012054-00
DT2010071-05
DT2010145-04
DT2030163-00
DT2030162-00
DT2030213-00