Fan Mode - Piazzetta P963 Instructions For Installation, Use And Maintenance Manual

Function
Set desired
Press SELECT MENU to set the desired fan speed (for example, you want
Multifuoco fan speed
fan speed setting 1). Confi rm by pressing the SET key. When programming
for fi rst operating
the timer on the stove it is not possible to set separate fan speeds.
cycle
After having programmed the fi rst operating cycle you may, if you wish, proceed with
programming the second operating cycle by going through the settings in the order as
described above. The number 2 appears on the display to indicate the second operating cycle.

6.11 FAN MODE

This function allows you to have the two fans operating at the same speed (NORMAL FANS) or at different speeds (SEPARATE FANS). To make the
most of the Multifuoco fan functions read the paragraphs MULTIFUOCO SYSTEM and MULTICOMFORT OPERATION.
Function
Select fan mode Press the MENU key. Using the SELECT MENU key select the fan-mode
menu "MODE FANS" menu and confi rm by pressing the SET key.
Press the SELECT MENU key and select separate fans "FANS SEPARATE"
Select normal fans or
or normal fans "FANS NORMAL". Confi rm by pressing the SET key. After
separate fans.
confi rmation the remote control automatically returns to the initial display.
38
Action
FAN MODE
Action
H07025410 / DT2000678 – 00
Display
S E T W E
V E N T - 1
0 1
1
S T A R T W E
P R O G R A M 2
2 0 : 3 0
1
DT2040073-03
DT2040069-04
Display
M O D E
F A N S
1
F A N S
S E P A R A T E
1
F A N S
N O R M A L
1