Table of Contents
Advertisement
1.4 fRESh AIR INTAkE
In order to operate correctly the stove/fireplace must have the necessary
air available provided through a fresh air intake.
The air intake must:
- have a total free cross section of at least the size indicated in the
section "TECHNICAL DATA";
- be protected by an external grille provided it does not reduce the
recommended minimum section;
- be positioned in such a way that it is not obstructed.
The air necessary for the fire may be obtained in different ways:
- through a fresh air intake direct to the room where the appliance is
installed;
- with ducting through pipes direct to the room where the appliance is
installed, increasing the recommended minimum free cross section
by at least 15%;
- from an adjacent room to that where the appliance is installed
provided the air flows freely from the outside through permanent
apertures communicating with the outside.
a
The adjacent room from which the air is to be taken must
not have a low pressure compared to the exterior due to a
counter draught caused by the presence in the room where
the appliance is installed of another appliance or extractor
device.
The adjacent room must have permanent apertures which
comply with the requirements provided above.
d
Combustion air must not be taken from adjacent rooms which
are used as a garage, store room for combustible material or
for activities with a risk of fire.
1.5 INSTALLATION ENvIRONmENT
The appliance should be installed in a location which allows safe and convenient use as well as easy maintenance. If the product being installed
requires an electrical socket, the room must also be provided with an earthed power supply in accordance with current regulations.
The room where the appliance is to be installed or adjoining rooms must comply with the following requirements:
a
They must not be used as a garage, store for combustible material or for activities with a risk of fire.
a
They must not have a low pressure compared to the exterior due to a counter draught caused by the presence in the room where the
appliance is installed of another appliance or extractor device.
a
Do not use two stoves, a fireplace and a stove, a stove and a wood-fire cooking range etc... in the same environment since the draught
of one could affect the draught of the other.
• Devices suitable for cooking food with relative hoods without an extractor fan may only be used in kitchens.
• Type C gas appliances are allowed (refer to current legislation and regulations in the country where the appliance is to be installed).
Fig. 12
Fig. 14
Fig. 15
H072043UK0 / DT2001455 - 00
Fig. 13
DT2030054-00
DT2010539-03
DT2030193-00
DT2030194-00
DT2030195-00
DT2010033-01
7
Hide quick links:
Advertisement
Table of Contents
