Gray Level Settings (Gray Level); Gray Level Settings (Gray Level - NEC PlasmaSync 50PD2 User Manual

Table of Contents

Advertisement

Gray Level Settings (GRAY LEVEL)

In [NORMAL] and other modes, this adjusts the brightness of non-image
portions that appear at top, bottom, left, or right of the screen.
Set [OSD MODE] to [PRO] on the configuration menu, then perform the
following operations.
Preparation Press the PROCEED button to display the main
menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Align the cursor with the desired item
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Set the gray level with the POSITION/
3
CONTROL
buttons
[1] : Black
[2] : Gray
[3] : Light gray
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all long life settings to the default
settings.
LONG LIFE MODE
LUM. LIMIT
: OFF
ORBITTING
: OFF
INV / WT
: OFF
PROG. ORBIT . . . . . . . .
GRAY LEVEL
: 3
ALL RESET
LONG LIFE MODE
LUM. LIMIT
: OFF
ORBITTING
: OFF
INV / WT
: OFF
PROG. ORBIT . . . . . . . .
GRAY LEVEL
: 3
ALL RESET
Long Life Settings (LONG LIFE MODE)
Important
I Gray Level Settings
The gray level can be set to suit the level of gray brightness desired by the
user.
There are marked differences in brightness between the display portions
and non-display portions (where there is no image) in [NORMAL] mode
which result in image burn-in due to strong contrast. In view of this, the
following settings are strongly recommended.
Note that image burn-in will still occur, though somewhat later, even after
making these settings and that burn-in cannot be suppressed. The monitor
should be used in [FULL] mode as much as possible.
1. Perform gray level settings to narrow the differences in brightness
between display and non-display portions of the image.
2. Weaken the image adjustment contrast and brightness. (See P.E-25)
3. Perform the Long Life settings. (P.E-42)
P
E-43
M
LASMA
ONITOR

Advertisement

Table of Contents
loading

Table of Contents