Power/Standby Indicator - NEC PlasmaSync 50PD2 User Manual

The status of the power management function can be checked with the POWER/STANDBY indicator of the monitor.
Power Manage- POWER/STANDBY
ment Mode Indicator
On State Green
Standby State Yellow
Suspend State Orange
Off State Orange
Note:
I Power Management Function
• The power management function is an energy-saving function that au-
tomatically reduces the power consumption of the monitor when the
keyboard or mouse have not been operated for a fixed period. This
function becomes valid when combined with a personal computer that
is based on the VESA DPMS system.
• When power is not being supplied to the personal computer or when
the personal computer and this monitor are not properly connected,
the power management function will operate and this monitor will en-
ter the "off state."
• Please see your personal computer user's manual for information about
the power management function of the personal computer side.
• During power management mode the fan may stop, but this is not a
malfunction.

POWER/STANDBY Indicator

Power Management
Operation Status
Horizontal/vertical sync sig-
Not operating nals are being input from the
personal computer.
Horizontal sync signal is not
Operating being input from the personal
computer.
Vertical sync signal is not
being input from the personal
Operating
computer.
Horizontal/vertical sync sig-
nals are not being input from
Operating
the personal computer.
Other Functions (OTHER SETTINGS)
Details Recovery Method
Not required since the personal computer is nor-
mally being used at this time.
Press a keyboard key or move the mouse. The
screen will be displayed immediately.
Press a keyboard key or move the mouse. The
screen will be displayed; however, it will take some
time from the standby state until the screen is dis-
played.
Press a keyboard key or move the mouse. The
screen will be displayed; however, it will take some
time from the standby state until the screen is dis-
played.
P
LASMA
E-39
M
ONITOR
†