Introduction; Contents Of The Package - NEC PlasmaSync 50PD2 User Manual

Introduction

OSM and IPM are trademarks of NEC Technologies, Inc.
IBM PC/AT, PS/2, VGA, S-VGA, 8514/A and XGA are registered
trademarks of International Business Machines Corporation.
Apple and Macintosh are registered trademarks of Apple Com-
puter, Inc.
Microsoft is a registered trademark of Microsoft Corporation. Win-
dows is a trademark of Microsoft Corporation.
Introduction to the PlasmaSync 50PD2
This section introduces you to your new PlasmaSync 50PD2, pro-
vides a list of materials that comes with your monitor and describes
the features and controls.
The features you'll enjoy include:
* This unit can be used with IBM PC/AT, Macintosh, and com-
patibles.
(For details, see "Factory Setting Values Preset Table." Pg.63)
* Easy-to-operate remote control and external control connector.
* Wired/Wireless Remote Control PX-RC2U (optional) can be used
as a wireless or as a wired remote control (with automatic switch-
ing by cable connection) and the remote THROUGH OUT con-
nector permits simultaneous operation of multiple monitors.
(A maximum of 3 units can be connected.)
The external control connector with a THROUGH OUT feature
permits various control functions to be made externally.
* ID No. settings can be made for up to 256 units.
* NTSC, PAL, SECAM, and M-NTSC composite video signals can
be accommodated
Video signals from video cameras, video decks, video disc play-
ers, and other video equipment adhering to NTSC as well as
PAL, SECAM, and M-NTSC (with a 4.43 MHz chroma signal)
standards can be selected on screen.
* Varied set of input/output connectors
• Video input/output: BNC video connector, S-video connector.
Each type is equipped with its own THROUGH OUT connec-
tor, single system.
• Analog RGB input: mini D-Sub 15-pin connector, BNC (G, B,
R, H/CS, V connectors). BNC is equipped with its own
THROUGH OUT connector, single system.
• DVD/HD input/output: BNC (Y, Cb/Pb, Cr/Pr connectors)
BNC is equipped with its own THROUGH OUT connector,
single system.
• Audio input signals: Stereo RCAx2
• Audio output signals: Stereo RCAx1
* Component video input terminal for DVD, 15.75 kHz (Y,Cb,Cr)
* You can select RGB source or Component source for the 5BNC
terminal (RGB2/DVD/HD). When selecting an RGB input, the
source is switched to the RGB input when selecting a compo-
nent input, the source is switched to the DVD/HD input.
* Can be used with Digital RGB input (DVI standard compliant)
* The signale plasma monitor provides four split screen feature.
* Can be used with multiple screens : 4-screen and 9-screen
VIDEO WALL (For 9-screen, an optional distribution amplifier is
needed for VIDEO WALL )
* Power management function
RGB3 input mode complies with DMPM (Digital Monitor Power
Management) of DVI.
A great reduction in power consumption when not being used is
achieved through the VESA-proposed DPMS system.
The unit can also be used with the Energy Star standard (in
which case power consumption will be 15 W or less when not
being used).
* The personal computer and the operating system that are to be
connected must be compatible with VESA DPMS.
Personal computers that are to be connected to the RGB3 input
must be compatible with DVI DMPM.
* OSM (On Screen Manager) function
The OSM function displays a variety of screen adjustment and
correction menus on the screen to allow fine settings to be made.
* Plug and Play compatible
Plug and Play supports VESA DDC1 and DDC level B.
(VESA DDC1 and DDC2 level B)
The RGB3 input is compatible with DDC2 level B only.
* Can be used with RS-232C
* IBM PC/AT is a registered trademark of International Busi-
ness Machines Corporation.
* Macintosh is a registered trademark of Apple Computer, Inc.
* VESA is a trademark of Video Electronics Standard Associa-
tion.
* DVI is an abbreviation for Digital Visual Interface.

Contents of the Package

The following lists all of the items included in your plasma monitor
package. Please save the original box and packing materials for
future transportation or shipment of this monitor.
1. Plasma monitor 1
2. Power cable 1
3. Wireless remote control 1
4. AA battery 2
5. Remote control holder 1
6. RGB signal cable
(mini D-sub 15-pin to mini D-sub 15-pin) 1
7. Stopper 2 *
8. Screw 2 *
9. Ferrite core (large) 1
10. Ferrite core (small) 2
11. User's manual 1
* These are fittings for fastening the unit to a wall to prevent tip-
ping due to external shock when using the stand (option).
Fasten the safety fittings to the holes in the back of the monitor
using the safety fitting mount screws.
Option
• Wired/ Wireless Remote Control
• Wall mount unit
• Ceiling mount unit
• Tilt mount unit
• Tabletop stand
• Others
9
P M
LASMA ONITOR
†