Power Management Settings (Power Manager); Power Management Settings (Power Manager - NEC PlasmaSync 50PD2 User Manual

Other Functions (OTHER SETTINGS)
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
E-38
P M
LASMA ONITOR
†

Power Management Settings (POWER MANAGER)

This sets the functions that serve to automatically reduce power
consumption.
Set [OSD MODE] to [PRO] on the configuration menu, then per-
form the following operations.
Preparation Press the PROCEED button to display the main
menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
2 Align the cursor with POWER MAN-
AGER
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Set the power management mode with
3
the POSITION/CONTROL
[ON] : Power management function operates.
[OFF] : Power management is cancelled.
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
COLOR SYSTEM : AUTO
P-ON MODE : LAST MEM
POWER MANAGER : OFF
SET ID NO : ALL
RGB3 ADJUST : 1
CINEMA MODE : ON
ALL RESET
COLOR SYSTEM : AUTO
P-ON MODE : LAST MEM
POWER MANAGER : OFF
SET ID NO : ALL
RGB3 ADJUST : 1
CINEMA MODE : ON
ALL RESET
buttons