Connecting Your Pc Or Ibm Compatible - NEC PlasmaSync 50PD2 User Manual

Connecting your PC to your Plasma monitor will enable you to display your computer's screen image.
Some video cards may not display an image correctly.
If you wish to input wide signals, make the "RGB MODE" and "INPUT MODE" settings.
(See "Signal Identification For Raster Preset" on page 64.)
Connect the Plasma Monitor to Your PC or IBM Compatible
• To connect the RGB 1 IN connector (mini D-sub 15 pin) on the plasma monitor, use the supplied RGB signal cable (mini D-sub 15 pin to
mini D-sub 15 pin).
• To connect the RGB 2/DVD/HD IN connector (BNC) on the plasma monitor, use the optional signal cable (mini D-sub 15 pin to BNC x 5).
Select [RGB] for RGB 2 from the INPUT SELECT menu.
When connecting one or more Plasma monitors, use the RGB 2/DVD/HD OUT connector (BNC).
• The AUDIO IN 1 and 2 can be both used for audio input. For connection, select [INPUT 1] or [INPUT 2] from the SOUND menu.
Mini D-sub 15 pin
To analog RGB output
PC or IBM compatible

Connecting Your PC or IBM compatible

RCA
Mini D-sub 15 pin
BNC x 5
BNC x 5
To RGB 2/DVD/HD IN
Plasma monitor (second monitor)
P
Connections
Plasma monitor
BNC x 5
15
M
LASMA ONITOR
†