Input Selection (Input Select); Input Selection (Input Select - NEC PlasmaSync 50PD2 User Manual

Input Selection (INPUT SELECT)

This performs RGB 2 input selection and sets the SCART jack.
Preparation Press the PROCEED button to display the main menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Align the cursor with the desired item
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Adjust with the POSITION/CONTROL
3
buttons
GRGB 2
Selects the signal connected to the RGB 2/DVD/HD IN con-
nector.
[RGB] : Set at time of RGB signal input
[DVD/HD] : Set at time of DVD/HD signal input
GSCART
[OFF] : Set so that the SCART jack is not connected
[ON] : Set to connect the SCART jack
* The SCART jack is not used in the United States. Normally
select [OFF].
If you select [ON], images will not be correctly displayed.
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
E-30
P M
LASMA ONITOR
†
INPUT SELECT
RGB2 : RGB
SCART : OFF
INPUT SELECT
RGB2 : RGB
SCART : OFF