Cinema Mode Setting (Cinema Mode); Cinema Mode Setting (Cinema Mode - NEC PlasmaSync 50PD2 User Manual

Cinema Mode Setting (CINEMA MODE)

This function sets the cinema mode according to video informa-
tion included on a DVD. This function is available on NTSC and
480I (60Hz) signals only. Set [OSD MODE] to [PRO] on the con-
figuration menu, then perform the following operations.
Preparation Press the PROCEED button to display the main
menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Align the cursor with CINEMA MODE
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Set the cinema mode with the
3
POSITION/CONTROL
[ON] : Detects whether a DVD source was based on
films or video. When it was based on films, it will
be progressively displayed with 2-3 pull down.
[OFF] : A DVD source will be progressively displayed
without 2-3 pull down.
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
COLOR SYSTEM : AUTO
P-ON MODE : LAST MEM
POWER MANAGER : OFF
SET ID NO : ALL
RGB3 ADJUST : 1
CINEMA MODE : ON
ALL RESET
COLOR SYSTEM : AUTO
P-ON MODE : LAST MEM
POWER MANAGER : OFF
SET ID NO : ALL
RGB3 ADJUST : 1
CINEMA MODE : ON
ALL RESET
buttons
Other Functions (OTHER SETTINGS)
Note:
I What is CINEMA MODE?
This is a mode to output DVD video information in a progressive signal
format.
I CINEMA MODE
• [ON]
Normally set to [ON]. This setting detects whether a DVD source
was based on film or video. When it was based on film, it will be
progressively displayed in the appropriate method.
• [OFF]
This setting is used for video source on DVD, converting into the
progressive output.
P
E-41
M
LASMA ONITOR
†