Connecting Your Vcr - NEC PlasmaSync 50PD2 User Manual

Connecting your VCR or laser disc player to your Plasma monitor will enable you to display your VCR' s or laser disc player' s video.
Refer to your VCR or laser disc player owner's manual for more information.
Connect the Plasma Monitor to a VCR or Laser Disc Player
• To connect the VIDEO IN connector (BNC) on the plasma monitor, use a separately available BNC connector cable. You will need a
separately available BNC-to-RCA adapter to connect a VCR or laser disc player with an RCA pin jack to the BNC connector cable.
• When connecting one or more Plasma monitors, use the VIDEO OUT connectors (BNC).
• The AUDIO IN 1 and 2 (both RCA) can be both used for audio input. For connection, select [INPUT 1] or [INPUT 2] from the SOUND
menu.
BNC
DIN 4
BNC-to-RCA
pin
adapter
To S-VIDEO OUT To VIDEO OUT
VCR or Laser disc player
NOTE:
VIDEO connector
S-VIDEO IN will take precedence over VIDEO IN when a component is connected to each connector.

Connecting Your VCR

DIN 4 pin
BNC
RCA
Plasma monitor
DIN 4 pin
BNC
BNC
To VIDEO IN
Plasma monitor (second monitor)
P
LASMA
Connections
DIN 4 pin
To S-VIDEO IN
E-15
M
ONITOR
†