Panasonic KX-NS1000 Getting Started page 33

Configuration of the Activation Keys
Depending on your configuration, it may be necessary to programme the number of provided IP Trunk channels
to be used for H.323 trunks. By default, all of the provided IP Trunk channels will be used for SIP trunks.
Similarly, you can programme how many IP softphone(s) can be used through the IP Softphone/IP Proprietary
Telephone activation key. By default, only IP softphone(s) can be used through the IP Softphone/IP Proprietary
Telephone activation key.
Note
For a detailed explanation about activation keys, refer to "3.1 Information about the Activation Keys" in
the Installation Manual.
4.1.3 Installing Additional Activation Keys
Click Setup ® PBX Configuration ®
1. a.
Configuration ® Slot.
b.
Click Activation Key.
a.
2.
In Number of activated IP-GW, type the number of
IP Trunk channels to be used for H.323 trunks.
Note
If you have changed the value for Number of
activated IP-GW, you must click Execute to
restart the V-IPGW cards for the change to take
effect.
b.
In Number of activated IP-Softphone, type the
number of IP softphones to be used through the IP
Softphone/IP Proprietary Telephone activation key.
3. Click OK.
Getting Started 33