Changing The Size And Orientation Of Paper In Tray 2 - Xerox WorkCentre 5016 User Manual

Changing the Size and Orientation of Paper in Tray 2

Xerox WorkCentre 5016/5020 User Guide
Downloaded From ManualsPrinter.com Manuals
The following procedure describes how to change the size and orientation of paper in
Tray 2.
1.
Pull out Tray 2 towards you.
Note • While the machine processes a
job, do not pull out the tray in use.
2.
Remove the remaining paper.
3.
Slide paper guides towards the front
and back of the tray.
4.
Slide the paper guide to the right.
5.
Load a new stack of paper neatly and
tightly against the left corner of the tray
with the side to be printed facing up.
Important • Do not load mixed types or mixed
sizes of paper together in Tray 2.
• Do not load paper above the
maximum fill line. It may cause
paper jams or machine
malfunctions.
Changing the Size and Orientation of Paper in the Trays
48