Xerox WorkCentre 5016 User Manual page 126

Menu
Number
12 Transition Time to Sleep Mode Select the transition time for the
13 Background Suppression
(Copying)
14 Background Suppression
(Scanning)
15 Metric/Inch
16 <Scan Completed> Auto Clear
Time
Xerox WorkCentre 5016/5020 User Guide
Downloaded From ManualsPrinter.com Manuals
Menu
machine to switch to the Sleep
Mode after the machine switches
to the Low Power Mode.
For more information on the Sleep
Mode, refer to "Sleep Mode" (P.32).
Note
The machine automatically
removes the background color of
an original document for a copy
job.
Select the Background
Suppression level.
The machine automatically
removes the background color of
an original document for a scan
job.
Select the Background
Suppression level.
Note
Select the default measurement
unit.
Note
When the indicator next to the
<Scan Completed> button is
blinking during a copy job, and if
the <Scan Completed> button is
not pressed for a specified period
of time to indicate the last page of
documents, the machine
automatically resumes to process
the copy job.
Description
• When selecting [0], the
machine switches to the
Sleep Mode as soon as
the machine switches to
the Low Power Mode
during inactivity.
• You can also select
whether or not to enable
this feature in the scan
driver.
• The default value
depends on the location
that you purchased the
machine.
• Depending on the
measuring unit the
machine is in, the
document sizes that can
be detected by the
Document Feeder
change. Refer to
"Document Sizes
Detectable by the
Document Feeder"
(P.130).
System Settings
Value
0: 0 minute
1: 5 minutes
2: 20 minutes*
3: 60 minutes
4: 120 minutes
5: 240 minutes
254: Disable
0: Disable
1: Level 1
2: Level 2*
3: Level 3
4: Level 4
5: Level 5
1: Level 1
2: Level 2*
3: Level 3
4: Level 4
5: Level 5
0: Metric
1: Inch13
2: Inch14
0: Disable
1: 20 seconds
2: 30 seconds
3: 60 seconds*
4: 90 seconds
126