Appendix; Specifications - Xerox WorkCentre 5016 User Manual

11 Appendix

Specifications

Xerox WorkCentre 5016/5020 User Guide
Downloaded From ManualsPrinter.com Manuals
This chapter provides the machine specifications, system settings menu list, optional
accessory list.
This section lists the main specifications of the machine. Note that the specifications
and the appearance of the product may change without prior notice.
Copy Feature Specifications
Type
Copying method
Scan resolution
Output resolution
Gradation
Warm-up time
Copy document
Development method
Document table type
Photosensitive type
Fusing system
Scanning method
Copy paper size
Copy paper weight
Console
Laser Xerography
600 x 600 dpi (23.6 x 23.6 dots/mm)
600 x 600 dpi (23.6 x 23.6 dots/mm)
256 levels
27 seconds or less (at 22°C room temperature)
The maximum size is 297 x 432 mm (A3, 11 x 17") for both sheets
and books
Dry development (single component)
Fixed
OPC
Heat roller
Flatbed scanning using CCD image sensor
[Trays 1 - 2]
Maximum: A3 SEF (297 x 420 mm), 11 x 17" SEF (279 x 432
mm)
Minimum : A5 SEF (148 x 210 mm)
[Bypass Tray]
Maximum: A3 SEF (297 x 420 mm), 11 x 17" SEF (279 x 432
mm)
Minimum : A5 SEF (148 x 210 mm)
Non-standard size: X direction 182 to 432 mm
Y direction 140 to 297 mm
Image loss width: Leading edge 4 mm or less, trailing edge 4 mm
or less, and top/front 4 mm or less.
Tray 1 : 60 - 90g/m
Tray 2 : 60 - 90g/m
Bypass Tray : 60 - 110g/m
2
2
2
119