Cleaning The Corotron Wire - Xerox WorkCentre 5016 User Manual

Hide thumbs Also See for WorkCentre 5016:
Table of Contents

Advertisement

Cleaning the Corotron Wire

Xerox WorkCentre 5016/5020 User Guide
Downloaded From ManualsPrinter.com Manuals
2.
Turn the Document Feeder Roller to
clean it with a soft cloth moistened with
water.
Important • Do not use cleaning agents other
than water or neutral detergent.
• Use a firmly wrung cloth to avoid
water drops from falling onto the
machine. If water gets into the
machine, it may cause the machine
malfunction.
Note
• If dirt does not come off easily,
gently wipe it with a soft cloth moistened with a small amount of neutral detergent.
3.
Close the Document Feeder Cover until it clicks into place.
If any streaks, black lines, or smears appear on the output copies, cleaning the
Corotron Wire may help resolve the problem. The following procedure describes how
to clean the Corotron Wire.
1.
Open the Front Cover.
2.
Pull the Corotron Wire back and forth
several times.
3.
Close the Front Cover.
Cleaning the Machine
118

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5020/bWorkcentre 5020/db

Table of Contents